How to send a new or updated config to a terminal or access unit

How to send a new or updated config to a terminal or access unit


Config / Employee Download 


Part 1

  1. Open WINTMS
  2. Select the Launch menu 
  3. Open Site Monitor
  4. Right click on the new terminal you added
  5. Choose the Command option
  6. Select ‘ Configuation ‘  from the list
  7. Choose the correct terminal from the " Term Ref " drop-down list
  8. Click the OK button


Part 2

  1. Open WINTMS
  2. Select the Launch menu 
  3. Open Site Monitor
  4. Right click on the new terminal you added
  5. Choose the Command option
  6. Select Download Employee Details
  7. In the Biometrics panel set on “ Include Template in Download “
  8. Click the OK button 




    • Related Articles

    • Performing a Mitrefinch terminal firmware upgrade on a 900 series clock or access control unit.

      NOTE: This method does not apply to terminals that are set up to use Full web services.  See other document for this method. NOTE: Before proceeding, ensure that the terminal has been polled up-to-date and that the Poller application or service that ...

    • How to deactivate and reactivate the terminal webpage.

      The ability to deactivate the terminal webpage has been added to firmware version 7.48.5.1 in response to concerns about the theoretical security risk of running PHP version 5.6.38 which is used to power the terminal webpage. Once the firmware has ...

    • Performing a Mitrefinch terminal firmware upgrade on a 900 series clock or access control unit via web services.

      Performing a Mitrefinch terminal firmware upgrade on a 900 series clock or access control unit. NOTE: This method applies to terminals that connect via full web services.  NOTE: Before proceeding, ensure that the terminal has been polled up-to-date ...

    • Full Rights for New User

      To copy a User, follow the following steps. From the System menu, access Maintain Users The Maintain Users menu is displayed. Select Users, then select the User to copy and press COPY The system will prompt you to enter the NEW User Code and Press ...

    • Upgrading V8 User manual

      Introduction This article is intended to guide through the six stages required to upgrade an existing installation of Mitrefinch TMS for Windows and WebTMS v8. It is intended for an IT professional who is familiar with the Mitrefinch software ...