How to add a new terminal into TMS via the Site Planner

How to add a new terminal into TMS via the Site Planner


Adding terminals into the TMS via the Site Planner


To add a New Terminal in Site planner


  1. Enter TMS
  2. Select the “Launch Tab” and enter “Site Planner”
  3. click on the Terminal icon on the screen (in Site Planner)
  4. left click on area on the page
  5. then it will prompt you with a new screen like below




  1. Complete all the details in the Terminal Details windows above.

NOTE: Newer versions may have additional field. Check with support if you are unsure what value to set.

  1. Location: Enter the location of the clock 
  2. Clock Type: keep as ordinary clock
  3. Enter the IP Address
  4. Configuration file: change to what type of clock it is


















  1. Then Press Ok
  2. When all the Terminal details are completed. Tick the Active Button (ONLY IF THE TERMINAL IS READY TO BE USED) if not wait until terminal is fully setup onsite then tick the active option.






    • Related Articles

    • Create New User

      From Maintain User> Add We enter the NEW user's Username, in this case SUSANG and pressed OK Next we completed the Edit User screen . We entered the User's Full Name and Profile. We clicked on the Set Password button and gave the User a temp password ...
    • Terminal Site Planner

      The Terminal Site Planner allows you to view and maintain scheduled jobs on the clocking terminals. To open the Terminal site planner, select the Terminal site planner icon from the Dashboard. The Terminal site planner displays a list of terminals. ...
    • How to add a new TMS or HR Text Field

      This articleis designed to show the user how to create a new alpha field onto either a TMS or HR Manager Panel. Note: Before performing these instructions please ensure a recent backup of the TMS database has been taken by your IT department prior, ...
    • Upgrading V8 User manual

      Introduction This article is intended to guide through the six stages required to upgrade an existing installation of Mitrefinch TMS for Windows and WebTMS v8. It is intended for an IT professional who is familiar with the Mitrefinch software ...
    • Performing a Mitrefinch terminal firmware upgrade on a 900 series clock or access control unit via web services.

      Performing a Mitrefinch terminal firmware upgrade on a 900 series clock or access control unit. NOTE: This method applies to terminals that connect via full web services.  NOTE: Before proceeding, ensure that the terminal has been polled up-to-date ...